The next generation of HD wireless is here! Use the RX-100HD/TX-100HD to make any camera wireless. This wireless transmitter and receiver allows you to add any of our cameras to Backup Camera System monitors. The works at a range of 300M. The transmitter is waterproof with an IP68 rating, allowing you to install it outside your vehicle. The system comes with instant pair which allows the driver to pair camera to monitor without leaving the cab. No more spending hours running cabling through your vehicle, simply use this system to connect your camera and monitor without the wiring hassle.
Specifications
Model No. | Transmitter: TX-100HD |
Receiver: RX-100HD | |
TX/Transmitter currents | 12V/200MA |
RX/Receiver currents | 12/200MA |
TX/Transmitter video input | AHD/TVI/CVI/CVBS (Automatically) |
RX/Receiver output | AHD 720P/1280x720 |
Audio | No/ Support one way (Optional) |
System | PAL/NTSC(Automatically) |
Wireless spectrum | 2.4GHz |
Operating frequency range | 2400-2483.5MHZ |
Receiver sensitivity | -89Dbm |
Transmission Distance | 500M(unobstructed)/30M(obstructed) |
Time of delay | About 90mS -120mS |
Boot time | 2S |
Transmission power | 12Mbps |
Pairing | Automatically |
Indication light |
Red light on/off: Power on / off Red light flashes: Pairing Green light on: connect successfully Green light off: signal lost |
TX/Transmitter power supply | DC 12V-24V, DC 5.5 connector |
TX/Transmitter power output | Support |
RX/Receiver power supply | DC 12V-24V |
Waterproof | IP68 |
Vibration rating | 4G |
Operating temperature | –20℃ ~ 70℃, RH95%MAX |
Storage temperature | –30℃ ~ 85℃, RH95%MAX |